Dranetz Guide Instruções de Operação descarregar pdf (Página 9)

QUICK REFERENCE GUIDE

LPC4300

Page 9

\899036a 4-1-98

CABLE CONNECTIONS

1. Connect the color coded and marked input cables inside the case to the rear

panel of the PP4300. The cable connector sequence and color scheme on the

PP4300 is identical to that of the LPC4300.

2. Connect the AC adapter output cable to the DC INPUT connector on the right

side of the PP4300. See Figure 1.

3. Connect the Domestic 115 VAC Cable (P/N 116187-G1) to the rear panel of the

LPC4300. The connector is marked “POWER INPUT 100-130 V~ 50-60 Hz”.

4. If applicable, connect the optional Current Transformer Interface Cable Set (P/N

CTIC-LPC4300) to the rear panel of the LPC4300. The set consists of two

cables, P/N 116185-G1 (CH A,B) and P/N 116185-G2 (CH C,D). Connect the

cable labeled (A,B) to the connector marked “CURRENT INPUTS CHANNELS

A-B). Connect the cable labeled (C,D) to the connector marked “CURRENT

INPUTS CHANNELS C-D”.

5. Connect the Voltage Measurement Cable (P/N 116183-G1) to the rear panel of

the LPC4300. The connector is marked “VOLTAGE INPUTS 600 VRMS MAX.

CHANNELS A-B-C-D”. NOTE: This cable must be installed and removed as

follows to assure proper sealing and prevent damage to the connector.

To install the cable, align the keyway in the cable connector with the tab in the

CAUTION

Do not connect or disconnect input cables until all power is de-energized to all

circuits. Make all connections to the rear panel of the PP4300 and the LPC4300

before making any connections to the circuit to be monitored.

Figure 5. Rear panel connections, LPC4300.

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Dranetz Guide Instruções de Operação Página 9